The Blackmagic Studio Camera 4K Plus has been specifically designed as the perfect camera for ATEM Mini. It’s the same high quality broadcast camera, but the HDMI centric design removes all the expensive broadcast connections so it’s much lower cost. The HDMI is incredibly powerful as it connects video to the ATEM Mini, while at the same time camera control, tally and the remote record trigger is sent to the camera using the same HDMI connection. That makes it very fast to set up for a job. Blackmagic Design Studio Camera 4K Plus Specs Imaging Sensor Resolution Not Specified by Manufacturer ISO Sensitivity 100 to 25,600 Gain 0 to 18 dB Signal-to-Noise Ratio 63 dB Camera Lens Mount Micro Four Thirds Built-In ND Filter None Built-In Microphone Type Stereo Broadcast System Compatibility NTSC, PAL Interfaces CCU Interface None Video I/O 1 x HDMI Output Audio I/O 1 x 1/8″ / 3.5 mm TRS Stereo Microphone Input 1 x 1/8″ / 3.5 mm TRRS Headphone/Mic Input/Output Other I/O 2 x USB-C (USB 3.2 / 3.1 Gen 1) Data/Video Input/Output Recording Recording Modes DNxHD/ProRes: 3840 x 2160p at 23.98/24/25/29.97/30/50/59.94/60 fps 1920 x 1080p at 23.98/24/25/29.97/30/50/59.94/60 fps Raw Recording Blackmagic RAW 3840 x 2160 at 23.98/24.00/25/29.97/50/59.94/60 fps [26 to 190 Mb/s] Audio Recording Raw: 2-Channel 24-Bit 48 kHz LPCM Audio Display Display Type Fixed Touchscreen LCD Size 7″ Resolution 1920 x 1200 Power Power I/O 1 x Barrel (12 VDC) Input Power Consumption >46 W Environmental Operating Temperature 32 to 104°F / 0 to 40°C Storage Temperature -4 to 113°F / -20 to 45°C Operating Humidity 0 to 90% General Accessory Mount 2 x 1/4″-20 Female Tripod Mount 3/8″-16 Female Dimensions (W x H x D) 10.77 x 6.68 x 6.59″ / 27.36 x 16.97 x 16.74 cm (Without Protrusions) Weight 3.71 lb / 1.68 kg Packaging Info Package Weight 6.975 lb Box Dimensions (LxWxH) 12.4 x 10.3 x 8.2″
